Kitchen Island Carts – The first steps is cutting wood; for the construction of a wagon Kitchen Island will need some plywood and some lumber to frame the island. Use a saw to cut the plywood into three 22 × 34 cm pieces for the walls of the wagon. Then cut the shelves at the same size. Now you will need to cut a piece of 37 cm for the top, the timber 1 × 4. The structure of the front must be 34 inches in length and cut timber by 1/2 inch. The doors can be cut from plywood. Cut 4 pieces of 17 1/2 by 27 1/4 inches.
Second steps to make kitchen island carts is putting the pieces together;Use glue and nails to secure the ends of the sides and the rear part of the frame together. To use the shelves of small studs and nails to the sides. Fasten shelves to the frame with glue. Allow the glue to dry and then the excess sand. Now, take the 1 × 4 frame the face and secure it to the top of the cart with nails and glue. You do the same for other pieces. Then cut the top of the plywood and connect to this timber.
And now the end step to make kitchen island carts;Now all you have to do is fill in the nail holes with wood putty and sand loro.Poi sand the entire cart and apply a coat of stain and sealer to make it more durable and also more elegant. Install the doors.